Detailed Product Description

the feature of pex pipe  

1 Distribute equitably the indoor temperature :     Floor panel heating and indoor temperature distribution are as shown in the figure. Surface temperature of floor usually is higher than 26 degree  temperature will gradually decrease in vertical direction ,air temperature at the heightof about 30cm from the floor is basically equal to indoor design temperature and after this, temperature at the same level is basically invariable .therefore ,it brings people with comfort of feet are warm but head is cool,which accords with theory of traditional Chinese medicine.

2Save energy sources: Radiating surface of floor panel heating is large , so water supply temperature required is comparatively lower and only 40-50 is needed .besides ,it is installed under the floor so heat loss is little.Comparaed with convection heating radiation heating is of higher efficiency .comfort level for human body depends on average indoor  radiation temperature .for the same design temperature average radiation temperature is higher when using floor panel heating .the same comfort effect can still be achieved when the indoor degihn temperature has decreased by 1 to 3 degree . according to the related date ,10   fuel can be saved for every 1 decrease of indoor design temperature .heat concentrate in the height that is beneficial to human body .Heat loss is small during the transmission for heat medium low temperature transmission. Thermal stability is good. As heat accumulation of floor and concrete is good and stable change of indoortemperature is slow under the intermitting heating condition.

3 Save space ,convenient and beautiful : save space for laying heating panel be convenient for house and indoor decoration and arrangement of furniture to make rooms more beautiful  reduce the fitment expense

4 Realize one-family heating meteral according to the size of room ,mount one oe several circuits in a room as for small room, mount one circuit in several rooms. Connect supply and return pipe of each circuit to distributor .Distributor of each user is connected to outdoor pipe network through supply and return main inside the building .As long as regulating valve or control equipment is installed on the distributor respectively for all circuits, adjustment and control  of heat supply can be easily made for room orientated differently .